News

Professional, Reliable, Affordable

Bonus Eventus

July 15, 2022

Need Air Duct Cleaning Services?

Bonus Eventus

July 8, 2022

Your Need to Repair or Replace Your HVAC System?

Bonus Eventus

July 4, 2022

appolinary-kalashnikova-WYGhTLym344-unsplash

Power Your Buildings With Green Energy

Bonus Eventus

June 7, 2022

In the past we’ve talked a lot about the environmental impact of buildings, particularly when it comes to heating them and supplying them with water. And we’ve also mentioned the […]

June 7, 2022

First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs.

Bonus Eventus

May 17, 2022

Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system’s failsafe operation. Inhibitor levels are always checked at PPMs

Bonus Eventus

May 10, 2022

The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits.

Bonus Eventus

May 8, 2022

Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs.

Bonus Eventus

May 7, 2022

HVAC Maintenance 24/7/365 call out

Bonus Eventus

March 12, 2022

HVAC Maintenance 24/7/365 call out

Bonus Eventus

March 12, 2022

Professional, Reliable, Affordable

Need Air Duct Cleaning Services?

Your Need to Repair or Replace Your HVAC System?

Power Your Buildings With Green Energy

First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs.

Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system’s failsafe operation. Inhibitor levels are always checked at PPMs

The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits.

Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs.

HVAC Maintenance 24/7/365 call out

HVAC Maintenance 24/7/365 call out

GET IN TOUCH

27 Rorkes Drift, Mytchett, Surrey, GU16 6EH

01276 986 130

info@bonuseventus.co.uk