Projects

First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs.

May 17, 2022

Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system’s failsafe operation. Inhibitor levels are always checked at PPMs

May 10, 2022

The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits.

May 8, 2022

Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs.

May 7, 2022

Professional Welding

April 30, 2022

We are looking forward to see you at the Expo of the year on Wednesday and Thursday 2nd and 3rd of March.

March 1, 2022

Test…Yes I guess it’s time to clean

May 8, 2021

Dirty extraction system is one of the most common fire hazard

May 4, 2021

Slightly corroded heating pipe 🤣 luckily we have replaced before burst

April 27, 2021

Maybe odd job for others but this is what these guys are best at, making ventilation system clean doesn’t matter where they are

April 24, 2021

First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs.

May 17, 2022

Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system’s failsafe operation. Inhibitor levels are always checked at PPMs

May 10, 2022

The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits.

May 8, 2022

Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs.

May 7, 2022

Professional Welding

April 30, 2022

We are looking forward to see you at the Expo of the year on Wednesday and Thursday 2nd and 3rd of March.

March 1, 2022

Test…Yes I guess it’s time to clean

May 8, 2021

Dirty extraction system is one of the most common fire hazard

May 4, 2021

Slightly corroded heating pipe 🤣 luckily we have replaced before burst

April 27, 2021

Maybe odd job for others but this is what these guys are best at, making ventilation system clean doesn’t matter where they are

April 24, 2021

First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs.

Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system’s failsafe operation. Inhibitor levels are always checked at PPMs

The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits.

Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs.

Professional Welding

We are looking forward to see you at the Expo of the year on Wednesday and Thursday 2nd and 3rd of March.

Test…Yes I guess it’s time to clean

Dirty extraction system is one of the most common fire hazard

Slightly corroded heating pipe 🤣 luckily we have replaced before burst

Maybe odd job for others but this is what these guys are best at, making ventilation system clean doesn’t matter where they are

First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs.

Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system’s failsafe operation. Inhibitor levels are always checked at PPMs

The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits.

Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs.

Professional Welding

We are looking forward to see you at the Expo of the year on Wednesday and Thursday 2nd and 3rd of March.

Test…Yes I guess it’s time to clean

Dirty extraction system is one of the most common fire hazard

Slightly corroded heating pipe 🤣 luckily we have replaced before burst

Maybe odd job for others but this is what these guys are best at, making ventilation system clean doesn’t matter where they are

GET IN TOUCH

27 Rorkes Drift, Mytchett, Surrey, GU16 6EH

01276 986 130

info@bonuseventus.co.uk